CD54ACT86, CD74ACT86

QUADRUPLE 2-INPUT EXCLUSIVE-OR GATES

SCHS322 – JANUARY 2003

2

POST OFFICE BOX 655303

• DALLAS, TEXAS 75265

exclusive-OR logic

An exclusive-OR gate has many applications, some of which can be represented better by alternative

logic symbols.

= 1

EXCLUSIVE OR

These are five equivalent exclusive-OR symbols valid for an CD74AC86 gate in positive logic; negation may be shown at any two ports.

=

2k

2k + 1

LOGIC-IDENTITY ELEMENT

EVEN-PARITY ELEMENT

ODD-PARITY ELEMENT

The output is active (low) if

all inputs stand at the same

logic level (i.e., A = B).

The output is active (low) if

an even number of inputs

(i.e., 0 or 2) are active.

The output is active (high) if

an odd number of inputs

(i.e., only 1 of the 2) are

active.

absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†

Supply voltage range, VCC

– 0.5 V to 6 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Input clamp current, IIK (VI < 0 or VI > VCC) (see Note 1)

±20 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Output clamp current, IOK (VO < 0 or VO > VCC) (see Note 1)

±50 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Continuous output current, IO (VO = 0 to VCC)

±50 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Continuous current through VCC or GND

±100 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Package thermal impedance,

θJA (see Note 2): E package

80

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

M package

86

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Storage temperature range, Tstg

– 65

°C to 150°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and

functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not

implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTES:

1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.

2. The package thermal impedance is calculated in accordance with JESD 51-7.

recommended operating conditions (see Note 3)

TA = 25°C

–55

°C to

125

°C

–40

°C to

85

°C

UNIT

MIN

MAX

MIN

MAX

MIN

MAX

VCC

Supply voltage

4.5

5.5

4.5

5.5

4.5

5.5

V

VIH

High-level input voltage

2

2

2

V

VIL

Low-level input voltage

0.8

0.8

0.8

V

VI

Input voltage

0

VCC

0

VCC

0

VCC

V

VO

Output voltage

0

VCC

0

VCC

0

VCC

V

IOH

High-level output current

–24

–24

–24

mA

IOL

Low-level output current

24

24

24

mA

∆t/∆v

Input transition rise or fall rate

10

10

10

ns/V

NOTE 3: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report,

Implications of Slow or Floating CMOS Inputs, literature number SCBA004.