대

EVSPIN32F0251S1

Safety and operating instructions

Safety and operating instructions

DANGER

HIGH VOLTAGE

A

A

1.2

1.3

1.4

General terms

Warning:

During assembly, testing, and operation, the evaluation board poses several inherent hazards, including

bare wires, moving or rotating parts and hot surfaces.

Danger:

There is danger of serious personal injury, property damage or death due to electrical

shock and burn hazards if the kit or components are improperly used or installed

incorrectly.

The kit is not electrically isolated from the high-voltage supply AC/DC input. The evaluation board is

directly linked to the mains voltage. No insulation is ensured between the accessible parts and the high

voltage. All measuring equipment must be isolated from the mains before powering the board. When

using an oscilloscope with the demo, it must be isolated from the AC line. This prevents shock from

occurring as a result of touching any single point in the circuit, but does NOT prevent shock when

touching two or more points in the circuit.

All operations involving transportation, installation and use, and maintenance must be performed by skilled

technical personnel able to understand and implement national accident prevention regulations. For the purposes

of these basic safety instructions, “skilled technical personnel” are suitably qualified people who are familiar with

the installation, use and maintenance of power electronic systems.

Intended use of evaluation board

The evaluation board is designed for demonstration purposes only, and must not be used for electrical

installations or machinery. Technical data and information concerning the power supply conditions are detailed in

the documentation and should be strictly observed.

Installing the evaluation board

•

The installation and cooling of the evaluation board must be in accordance with the specifications and target

application.

•

The motor drive converters must be protected against excessive strain. In particular, components should not

be bent or isolating distances altered during transportation or handling.

•

No contact must be made with other electronic components and contacts.

•

The board contains electrostatically-sensitive components that are prone to damage if used incorrectly. Do

not mechanically damage or destroy the electrical components (potential health risks).

Operating the evaluation board

To operate properly the board, follow these safety rules.

1. Work Area Safety:

DB3976 - Rev 1

page 3/21