Board Mount PPN Heat Sinks

 Length 

 Part Number 

 Without Pins 

 Clip 

 Thermal Rating 

°C/W

Stock

 Category 

50.0

PPN0500B

02

5.00

A

75.0

PPN0750B

02

3.70

A

100.0

PPN1000B

02

3.10

A

150.0

PPN1500B

02

2.30

A

This heatsink is suitable

for use with device(s):

TO220, TO218, TO247

All dimensions shown are subject to commercial tolerances. Details of individual tolerances and fully dimensioned drawings available on request.

Where a device is shown it is for illustrative purposes only. The heatsink is supplied without a device. Most board mount and bga heatsinks are supplied black anodised to assist

thermal performance.

Thermal Resistance is calculated based on a distributed heat load on anodised heatsink with vertically mounted fins based on a 60ºC temperature rise. Under general operating

conditions the thermal mounting arrangement of devices is not known and therefore the figures should be used only as a guide to selection.

We recommend that the effectiveness of any heatsink is tested in the specific operating environment in which it will be subjected.

All information is for reference purposes only.