PCM1602A

SLES146A – AUGUST 2005 – REVISED OCTOBER 2010

www.ti.com

B15

B14

B13

B12

B11

B10

B9

B8

B7

B6

B5

B4

B3

B2

B1

B0

REGISTER 7

R/W

IDX6

IDX5

IDX4

IDX3

IDX2

IDX1

IDX0

RSV

RSV

MUT6

MUT5

MUT4

MUT3

MUT2

MUT1

R/W – Read/Write Mode Select

When R/W = 0, a write operation is performed.

When R/W = 1, a read operation is performed.

Default value: 0

MUTx – Soft Mute Control

Where x = 1 through 6, corresponding to the DAC output VOUTx.

These bits are read/write.

Default value: 0

MUTx = 0

Mute disabled (default)

MUTx = 1

Mute enabled

The mute bits, MUT1 through MUT6, are used to enable or disable the soft mute function for the corresponding

DAC outputs, VOUT1 through VOUT6. The soft mute function is incorporated into the digital attenuators. When

mute is disabled (MUTx = 0), the attenuator and DAC operate normally. When mute is enabled by setting

MUTx = 1, the digital attenuator for the corresponding output is decreased from the current setting to the infinite

attenuation setting, one attenuator step (0.5 dB) at a time. This provides a quiet, pop-free muting of the DAC

output. On returning from soft mute, by setting MUTx = 0, the attenuator is increased one step at a time to the

previously programmed attenuation level.

B15

B14

B13

B12

B11

B10

B9

B8

B7

B6

B5

B4

B3

B2

B1

B0

REGISTER 8

R/W

IDX6

IDX5

IDX4

IDX3

IDX2

IDX1

IDX0

RSV

RSV

DAC6

DAC5

DAC4

DAC3

DAC2

DAC1

R/W – Read/Write Mode Select

When R/W = 0, a write operation is performed.

When R/W = 1, a read operation is performed.

Default value: 0

DACx – DAC Operation Control

Where x = 1 through 6, corresponding to the DAC output VOUTx.

These bits are read/write.

Default value: 0

DACx = 0

DAC operation enabled (default)

DACx = 1

DAC operation disabled

The DAC operation controls are used to enable and disable the DAC outputs, VOUT1 through VOUT6. When

DACx = 0, the output amplifier input is connected to the DAC output. When DACx = 1, the output amplifier input

is switched to the dc common-mode voltage (VCOM), equal to VCC/2.

24

Submit Documentation Feedback

Copyright © 2005–2010, Texas Instruments Incorporated

Product Folder Link(s): PCM1602A