STM32F412RGH7P datasheet(81/201 Pages) STMICROELECTRONICS

81 / 201 page

DocID028087 Rev 7

81/201

STM32F412xE/G

Electrical characteristics

166

Table 14. Current characteristics

Symbol

Ratings

Max.

Unit

ΣIVDD

Total current into sum of all VDD_x power lines (source)(1)

160

Σ IVSS

Total current out of sum of all VSS_x ground lines (sink)(1)

-160

Σ IVDDUSB

Total current into VDDUSB power lines (source)

IVDD

Maximum current into each VDD_x power line (source)(1)

100

IVSS

Maximum current out of each VSS_x ground line (sink)(1)

-100

IIO

Output current sunk by any I/O and control pin

Output current sourced by any I/O and control pin

-25

ΣIIO

Total output current sunk by sum of all I/O and control pins (2)

120

Total output current sunk by sum of all USB I/Os

Total output current sourced by sum of all I/Os and control pins(2)

-120

IINJ(PIN) (3)

Injected current on FT and TC pins (4)

–5/+0

Injected current on NRST and B pins (4)

ΣIINJ(PIN)

Total injected current (sum of all I/O and control pins)(5)

±25

1. All main power (VDD, VDDA, VDDUSB) and ground (VSS, VSSA) pins must always be connected to the external power supply,

in the permitted range.

2. This current consumption must be correctly distributed over all I/Os and control pins.

3. Negative injection disturbs the analog performance of the device. See note in Section 6.3.20: 12-bit ADC characteristics.

4. Positive injection is not possible on these I/Os and does not occur for input voltages lower than the specified maximum

value.

5. When several inputs are submitted to a current injection, the maximum

ΣIINJ(PIN) is the absolute sum of the positive and

negative injected currents (instantaneous values).

Table 15. Thermal characteristics

Symbol

Ratings

Value

Unit

TSTG

Storage temperature range

–65 to +150

°C

Maximum junction temperature

130

TLEAD

Maximum lead temperature during soldering

(WLCSP64, LQFP64/100/144, UFQFPN48,

UFBGA100/144)

see note (1)

1. Compliant with JEDEC Std J-STD-020D (for small body, Sn-Pb or Pb assembly), the ST ECOPACK®

7191395 specification, and the European directive on Restrictions on Hazardous Substances (ROHS

directive 2011/65/EU, July 2011).

STM32F412RGH7P 数据表(PDF) 81 Page - STMicroelectronics

STM32F412RGH7P 数据表(HTML) 81 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载