Compact Relay Bases

UL 94-V0 Rated Nylon

Page <2>

09/06/12 V1.1

www.element14.com

www.farnell.com

www.newark.com

Specifications:

Contact Load

: 250 V ac at 10 A (MCCDSR types)

: 250 V ac at 10 A (MCS8P / MCS11P)

: 250 V ac at 10 A (MCS8F / MCS11F)

Insulation

: >103 M

Dielectric Strength

: 2 K V

Fixings

: M3 screws or DIN-rail EN50022

Material

: Nylon PA6

Weight

: CDSR types

: 45 g

Specification Table

Type

Mounting

No Pins

Terminals

Part Number

Part Number

Sockets

Panel

8

Rear Screw

MCCDSR08

11

MCCDSR11

Panel / DIN rail

8

Front Screw

MCS8P

11

MCS11P

Free

8

Solder

MCS8F

11

MCS11F

Cover*

-

-

-

MCFWSP

*To Suit S8P and S11P.

Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of

it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces

all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use

made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted.

Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising)

is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012.

Features:

• This range of compact sockets manufactured nylon PA6 and can be DIN-rail, panel or chassis mounted products

• The sockets are suitable for use with tempatron 8 and 11 pin timers and process controllers

• All screw terminals are shrouded and finger proofed to maximise safety

• Terminals are rated at 5 A and 10 A at 250 V ac depending on type