Europa House, Airport Way, Luton, Bedfordshire, LU2 9NH

Technical: 01582 692 444 technical@europa-plc.com

www.europa-plc.com

Data Sheet

EDS1019-003

Page 2 of 2

EUR PA

LB20, 25, 32, 403PSN / LB32, 403P / LB20, 25, 32, 404P AC-21

Enclosed Switch Disconnectors

Terminal Configuration

Note: Neutral contact is

Early make/ Late break

Mounting Details

Procedure to dismantle the cover:

• Ensure the switch is in the OFF position

• Unscrew the cover screws & remove the cover

• For easy wiring, the switch can be removed from the base & then clicked back into place once wiring is complete

• After wiring ensure the profile orientation of the actuating spindle & knob shaft are in the same position

• Replace the cover & take care not to overtighten the screws (recommended tightening torque 0.5Nm)

• Do not install using power driven screwdrivers

Please Note : There is no need to remove the switch handle in order to remove the cover