© 2002 Fairchild Semiconductor Corporation

www.fairchildsemi.com

SMBJ5V0(C)A - SMBJ170(C)A Rev. 1.1.1

November 2014

SMBJ5V0(C)A - SMBJ170(C)A

600 Watt Transient Voltage Suppressors

Features

• Glass-Passivated Junction

• 600 W Peak Pulse Power Capability

on 10/1000

μs Waveform.

• Excellent Clamping Capability

• Low-Incremental Surge Resistance

• Fast Response Time: Typically Less than 1.0 ps from 0 V

to BV minimum for Unidirectional and 5.0 ns for Bidirectional

•Typical IR Less than 1.0 μA Above 10 V

• UL Certificate #E258596

Absolute Maximum Ratings

Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be opera-

ble above the recommended operating conditions and stressing the parts to these levels is not recommended. In addi-

tion, extended exposure to stresses above the recommended operating conditions may affect device reliability. The

absolute maximum ratings are stress ratings only. Values are at TA = 25°C unless otherwise noted.

Note:

1. Measured on 8.3 ms single half-sine wave or equivalent square wave: duty cycle = 4 pulses per minute maximum.

Symbol

Parameter

Value

Unit

PPPM

Peak Pulse Power Dissipation on 10/1000

μs Waveform

600

W

IPPM

Peak Pulse Current on 10/1000

μs Waveform

See Table

A

IFSM

Non-Repetitive Peak Forward Surge Current

Superimposed on Rated Load (JEDEC Method)(1)

100

A

TSTG

Storage Temperature Range

-55 to 150

°C

TJ

Operating Junction Temperature Range

-55 to 150

°C

SMB/DO-214AA

Band denotes cathode on unidirectional devices only.

No band on bi-directional devices. Bi-directional types

have CA suffix where electrical characteristics apply in

both directions suitable for bi-directional applications.