XC6413 datasheet(16/20 Pages) TOREX

16 / 20 page

16/20

XC6413/XC6414 Series

■

TIMING CHART

●

Using the VD output level signal as the reset signal of T-FF (VD Sense = VIN PIN)

●

Changing the VD output level signal into a one shot pulse to use T-FF as the reset signal (VD Sense = VIN PIN)

●

Changing the VD output level signal into a one shot pulse to use T-FF as the reset signal (VD Sense = VROUT PIN)

1. Please use this IC within the stated absolute maximum ratings. The IC is liable to malfunction should the ratings be

exceeded.

2. Where wiring impedance is high, operations may become unstable due to noise and/or phase lag depending on output

current. Please strengthen VIN and VSS wiring in particular.

3. Please wire the input capacitor (CIN) and the output capacitor (CL) as close to the IC as possible.

Should rapid input fluctuation or load fluctuation occur, please increase the capacitor value such as CIN or CL to stabilize

the operation.

■

NOTES ON USE

The circled letters correspond to those shown on the block diagram

XC6413/14B Series

XC6413 数据表(PDF) 16 Page - Torex Semiconductor