TLC252, TLC252A, TLC252B, TLC252Y, TLC25L2, TLC25L2A, TLC25L2B

TLC25L2Y, TLC25M2, TLC25M2A, TLC25M2B, TLC25M2Y

LinCMOS

 DUAL OPERATIONAL AMPLIFIERS

SLOS002I – JUNE 1983 – REVISED MARCH 2001

4

POST OFFICE BOX 655303

• DALLAS, TEXAS 75265

absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†

Supply voltage, VDD (see Note 1)

18 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Differential input voltage, VID (see Note 2)

±18 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Input voltage range, VI (any input)

– 0.3 V to 18 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Duration of short circuit at (or below) 25

°C free-air temperature (see Note 3)

unlimited

. . . . . . . . . . . . . . . . . .

Continuous total dissipation

See Dissipation Rating Table

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Operating free-air temperature range, TA

0

°C to 70°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Storage temperature range

– 65

°C to 150°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds

260

°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and

functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not

implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTES:

1. All voltage values, except differential voltages, are with respect to VDD – /GND.

2. Differential voltages are at IN+, with respect to IN –.

3. The output may be shorted to either supply. Temperature and/or supply voltages must be limited to ensure the maximum dissipation

rating is not exceeded.

DISSIPATION RATING TABLE

PACKAGE

TA ≤ 25°C

POWER RATING

DERATING FACTOR

ABOVE TA = 25°C

TA = 70°C

POWER RATING

D

725 mW

5.8 mW/

°C

464 mW

P

1000 mW

8.0 mW/

°C

640 mW

PW

525 mW

4.2 mW/

°C

336 mW

recommended operating conditions

MIN

MAX

UNIT

Supply voltage, VDD

1.4

16

V

VDD = 1.4 V

0

0.2

Common mode input voltage VIC

VDD = 5 V

– 0.2

4

V

Common-mode input voltage, VIC

VDD = 10 V

– 0.2

9

V

VDD = 16 V

– 0.2

14

Operating free-air temperature, TA

0

70

°C