TLE2426EP

RAIL SPLITTER

PRECISION VIRTUAL GROUND

SGLS345 − JUNE 2006

2

POST OFFICE BOX 655303

• DALLAS, TEXAS 75265

ORDERING INFORMATION

TA

PACKAGE†

ORDERABLE

PART NUMBER

TOP-SIDE

MARKING

−55

°C to 125°C

SOIC (D)

Tape and reel

TLE2426MDREP

2426EP

† Package drawings, standard packing quantities, thermal data, symbolization, and PCB design

guidelines are available at www.ti.com/sc/package.

absolute maximum ratings over operating free-air temperature (unless otherwise noted)†

Continuous input voltage, VI

40 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Continuous filter trap voltage

40 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Output current, IO

±80 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Duration of short-circuit current at (or below) 25

°C (see Note 1)

Unlimited

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Continuous total power dissipation

See Dissipation Rating Table

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Operating free-air temperature range, TA

−55

°C to 125°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Operating junction temperature, TJ (see Note 2)

150

°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Storage temperature range, Tstg (see Note 2)

150

°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Lead temperature 1,6 mm (1/16 in) from case for 10 s

260

°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and

functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not

implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTES:

1. The output may be shorted to either supply. Temperature and/or supply voltages must be limited to ensure that the maximum

dissipation rating is not exceeded.

2. Long-term high-temperature storage and/or usage at the absolute maximum ratings may result in a reduction of overall device life.

See http://www.ti.com/ep_quality for additional information on enhanced plastic packaging.

DISSIPATION RATING TABLE

PACKAGE

TA ≤ 25°C

DERATING FACTOR

TA = 70°C

TA = 85°C

TA = 125°C

PACKAGE

TA ≤ 25 C

POWER RATING

DERATING FACTOR

ABOVE TA = 25°C

TA = 70 C

POWER RATING

TA = 85 C

POWER RATING

TA = 125 C

POWER RATING

D

1102 mV

10.3 mW/

°C

638.5 mW

484 mW

72.1 mW

recommended operating conditions

MIN

MAX

UNIT

Input voltage, VI

4

40

V

Operating free-air temperature, TA

−55

125

°C