13 / 58 page
IP113M LF
Preliminary Data Sheet
13/58
April 9, 2007
Copyright © 2004, IC Plus Corp.
IP113M LF-DS-R11
PIN Description (continued)
Pin no.
Label
Type
Description
SMI interface
47, 48
MDC, MDIO
I, IO
SMI interface
The external MAC device uses the interface to program
IP113M LF. MDIO is an open drain.
31, 32,
37, 12, 46
ADDR[4:0]
IPL
PHY address
The external MAC device uses the address to identify
each IP113M LF in a chassis.
IP113M LF also uses ADDR[2:0] as EEPROM address
A[2:0] to read EEPROM.
Pin no.
Label
Type
Description
EEPROM interface
45, 46
SDA, SCL
IPH, O EEPROM interface
Pin no.
Label
Type
Description
Misc.
28
RESETB
I
Reset
It is low active.
41, 40
OSCI, X2
I, O
Crystal pins
OSCI and X2 are connected to a 25Mhz crystal.
If a 25MHz oscillator is used, OSCI is connected to the
oscillator’s output and X2 should be left open.
26, 27
TSM, TSE
IPL
Scan pins
These two pins should be left open or connected to ground
for normal operation.
15
INTB
O
Interrupt
0: an interrupt happens. Its output is low.
1: no interrupt. Its output is high impedance and it needs
an external pull up resistor.
Pin no.
Label
Type
Description
Power
1,7,11
AVCC
2.5V Analog Power
19,39,44
VCC
2.5V Digital Power
34
VCC_IO
3.3V or 2.5V Digital Power
35
GND_IO
I/O Ground
4,10,20,
42,43
GND
Ground
Chinese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
