
IP1726 LF
Preliminary Data Sheet
20/33
Jun 15, 2005
Copyright © 2003, IC Plus Corp.
IP1726 LF-DS-R06
Register
Address
Register Description
Attribute
Default
value
03H
Egress/Ingress data rate control for port 1.
Bit[7:0]: Egress data rate control.
Bit[15:8]: Ingress data rate control.
The maximum ingress/egress byte number in one time unit is.
Bit[15:8] * 512 for Ingress
Bit[7:0] * 512 for Egress.
The one time unit is 10ms for 100Mbps seed and 100ms for 10Mbps
speed.
R/W
16’hffff
04H~
1CH
Egress/Ingress data rate control for port 2 to port 26.
The definition is the same as that of the register 03H.
R/W
16’hffff
1DH
Port receive function.
1: Enable;
0: Disable.
Bit 0 corresponds to port 1.
Bit 15 corresponds to port 16.
R/W
16’Hffff
1EH
Port receive function.
1: Enable;
0: Disable.
Bit 0 corresponds to port 17.
Bit 9 corresponds to port 26.
R/W
10’h3ff
1FH
MAC reset for port 1 to port 16.
0: Activate reset; 1: normal operation.
Bit 0 corresponds to port 1.
Bit 15 corresponds to port 16.
R/W
16’hffff
20H
MAC reset for port 17 to port 26.
0: Activate reset; 1: normal operation.
Bit 0 corresponds to port 17.
Bit 9 corresponds to port 26.
R/W
10’h3ff
21H
MAC filters the data frames for port16~pot1, 1 bit per port
0: only control frames are forwarded
1: all good frames are forwarded
R/W
16’hffff
22H
MAC filters the data frames for port26~pot17, 1 bit per port
bit[9:0] : 0: only control frames are forwarded
1: all good frames are forwarded.
Other bits are reserved.
R/W
10’h3ff
23H
Port base priority enable for port16~pot1, 1 bit per port
bit[15:0] : 0: This port is set to normal priority
1: This port is set to high priority
R/W
16’h0
24H
Port base priority enable for port26~pot17, 1 bit per port
bit[15:0] : 0: This port is set to normal priority
1: This port is set to high priority
R/W
10’h0
25H
VLAN Tag based priority enable for port16~pot1, 1 bit per port
bit[15:0] : 0: disable
1: enable
R/W
16’h0
26H
VLAN Tag based priority enable for port26~pot17, 1 bit per port
bit[15:0] : 0: disable
1: enable
R/W
10’h0