Ω

TS5V330C

www.ti.com

SCDS276B – APRIL 2009 – REVISED DECEMBER 2009

PARAMETER MEASUREMENT INFORMATION (continued)

For additional information, refer to the TI application report, Measuring Differential Gain and Phase, literature number

SLOA040.

Figure 6. Test Circuit for Differential Gain/Phase Measurement

The differential gain and phase is measured at the output of the ON channel. For example, when VIN = 0, VEN =

0, and DA is the input, the output is measured at S1A.

HP8753ES Setup

Average = 20

RBW = 300 Hz

Smoothing = 2%

VBIAS = 0 to 1 V

ST = 1.381 s.

P1 = –7 dBM

CW frequency = 3.58 MHz

Copyright © 2009, Texas Instruments Incorporated

Submit Documentation Feedback

9

Product Folder Link(s): TS5V330C