AIO-CSJIN3 datasheet(27/53 Pages) AIO

27 / 53 page

PT, SP

To more easily illustrate ordering procedure, part number PT00A-20-41PW(SR) is

shown as follows:

A - 20 - 41

W (SR)

See code below:

1. Connector Type

“PT” designates standard olive drab, electrically conductive cadmium plate

bayonet lock connector with solder contacts

“SP” designates electrically non-conductive, hard anodic coated bayonet lock

connector with solder contacts and larger flange and mounting holes for

back panel mounting

“PTG” designates plug with grounding fingers

2. Shell Style

“00” designates wall mounting receptacle

“01” designates cable connecting receptacle**

“02” designates box mounting receptacle

“06” designates straight plug

“07” designates jam nut receptacle

“08” designates 90 degree plug cable support

“B”

designates thru bulkhead receptacle (pressurized)

“

I”

designates solder mount receptacle (Hermetic only)

3. Service Classes

“A”

designates general duty back shell

“C”

designates pressurized receptacle

“E”

designates environmental resisting open wire seal with grommet and nut

“P”

designates assembly with potting boot

“PG” designates adapter for cable gland for moisture proofing jacketed cables

“H”

designates hermetic* without interfacial seal

“Y”

designates hermetic* with interfacial seal

4. Shell Size

“20” designates shell size. Shell sizes 6 through 24 available.

5. Insert Arrangement - Refer to pages 4-10 for insert availability.

“20 - 41” designates insert arrangement. (The number following the hyphen is

the number only that is used in the part number).

6. Contacts

“P” designates pin contacts

“S” designates socket contacts

For ordering connectors with printed circuit board contacts, see pg. 19.

7. Insert Rotation - Refer to page 6.

“W”, “X”, “Y”, “Z” designate that insert is rotated in its shell from “normal position.

No letter required for normal (no rotation) position.

8. “SR” designates a strain relief clamp.

Indicate optional finishes as follows:

(003) olive drab cadmium plate (standard on “PT”)

(100) Suffix added for flat eyelet pin contacts in hermetic versions

RoHS Compliant finish suffix as follow:

(005) anodic coating - Alumilite® (standard on “SP”)

(023) electroless nickel

(025) black zinc cobalt plating

(072) conductive gray zinc nickel plating

(424) electroless nickel finish with strain relief

(470) black zinc cobalt plating

with strain relief

MS/PT

MIL-DTL-26482, Series 1

Part number MS3110E20-41PW is shown as follows:

311

20 - 41

For Hermetic connectors part number MS3113H20Y-

41PW is shown as follows:

311

20 Y 41

5, 6

See code below:

1. “MS” designates Military Standard

2. Specification Number

“311” designates basic family number for

MIL-DTL-26482, Series 1 solder type

3. Shell Style

“0” designates wall mounting receptacle

“1” designates cable connecting receptacle**

“2” designates box mounting receptacle

“3” designates solder mount receptacle

(hermetic only)

“4” designates jam nut receptacle

“6” designates straight plug

4. Service Class

“E” designates environmental resisting connector

“F” designates environmental resisting connectors

with strain relief

“J” designates clamp assembly for moisture proofing

multi-jacketed cables, with strain relief

“P” designates potted type with potting boot

“H” designates hermetic

5. Shell Size

“20” designates shell size. Shell sizes 8 through 24

available.

6. Insert Arrangement - Refer to pages 4-10 for insert

availability.

“20 - 41” designates arrangement. (The number

following the hyphen is the number only that is used in

the part number).

Hermetic version

“20Y41” designates insert arrangement; specify “Y” for

flat eyelet pin contacts, or “C” for solder cup pin

contacts

7. Contact Configuration

“P” designates pin contacts

“S” designates socket contacts

8. Insert Rotation- Refer to page 6.

“W”, “X”, “Y”, “Z” designate that insert is rotated in it

shell from “normal” position. No letter require fo normal

(no rotation) position.

* Hermetic connectors are supplied with tin plated shells.

** This connector style is sometimes referred to as a cable

connecting “plug”. It does, however, mate with either a straight or

90 degree plug.

PT, SP, MS/PT

how to order

AIO-CSJIN3 数据表(PDF) 27 Page - Amphenol Industrial Products Group.

AIO-CSJIN3 数据表(HTML) 27 Page - Amphenol Industrial Products Group.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53

数据表下载