AIO-CSJIN5SLASH2 datasheet(46/53 Pages) AIO

46 / 53 page

Coaxial Contacts

for miniature cylindrical connectors

Amphenol® Miniature Connectors can incorporate shielded coax contacts. The

Miniature family is built around MIL-DTL-26482 specifications, with Mil-

approved and proprietary styles offered. Normal operating voltage for

Miniature cylindricals with power only contacts is up to 1,000 VAC (RMS) at

sea level.

Table 1: Miniature Cylindricals offer these features for contact

termination

flexibility:

• Several insert arrangements that can incorporate:

• Size 8 & 12 Crimp Coax contacts for Crimp type

• Size 8 & 12 Solder Coax contacts for Solder type

• Wide selection of connector shell styles and sizes

• Standard power contact options within the various connector styles

include: solder type, crimp front release, crimp rear release

• Coax contacts are designed to the same high performance standards as

power contacts. Coax and power contacts may be intermixed with no

degradation of connector reliability.

• No mis-mating or cross-plugging with insert rotation and keyway

polarization.

Table 2: GENERAL ORDERING INFORMATION

Amphenol Miniature Cylindricals are normally supplied with a full complement

of power contacts, separately packaged. Coax contacts are ordered by part

number as referenced in the part number charts on the following pages of this

catalog, and are substituted for the power contacts at the time of the cable or

equipment assembly. If the application is for coax only, the connector may be

ordered less contacts and no power contacts will be supplied.

Installation instructions for the coax contacts for Miniature Connectors are

provided in Amphenol documents as follows: L-633 for solder type; L-613 for

SE type.

HOW TO ORDER:

A. Select the coax contacts designed for the cable being used from the

applicable charts in this catalog for each Miniature type (solder, SE).

B. Select a connector insert from those shown on pages 4-5 which will

accommodate the quantity and size of coaxial contacts needed plus any

power contacts required. Note: Size 8S and 12S contacts are used with

connector inserts through shell size 18 only. For larger connector shell

sizes, use size 8L contacts.

C. Determine the Miniature Cylindrical type, shell style, finish, service class

and insert rotation required for your application.

D. Consult Amphenol, Sidney NY with the pertinent cable, contact, insert

arrangement and connector style choices for complete connector

part number.

Solder Coax Contact

for use in Miniature Solder Type Connectors

Pin Crimp Coax Contact

for use in Miniature Crimp SE Type Connectors

Socket Crimp Coax Contact

for use in Miniature Crimp SE Type Connectors

AIO-CSJIN5/2 数据表(PDF) 46 Page - Amphenol Industrial Products Group.

AIO-CSJIN5/2 数据表(HTML) 46 Page - Amphenol Industrial Products Group.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53

数据表下载