1

Amphenol Miniature Cylindrical Connectors

Proprietary/MIL-DTL-26482, Series 1

®

Amphenol® Miniature Cylindrical connectors offer twice the number of contacts in just half the size of a Standard connector. These

miniature connectors, are available in several series, each with varying design characteristics and customer options to meet cost

considerations and provide maximum design flexibility. There are two styles within the family that are MS approved and qualified to

MIL-DTL-26482, Series 1, and in addition there are several proprietary styles.

Common features of all styles:

• All are for general duty applications and environmental sealing is achieved with the grommet and clamp design.

• Operating temperature is from –55°C to +125°; Operating voltage to 1000 VAC (RMS) at sea level.

• Pin and socket contacts are machined from low loss copper alloy and gold plated to eliminate contact corrosion and provide an

indefinite shelf life.

• All have resilient inserts which provide high dielectric strength and moisture barrier.

• A variety of shell finishes (including non-cadmium) and a variety of backend accessories are available within the styles.

Options

• 7 shell styles with 60 insert patterns

• Hermetic seal (glass fusion)

receptacle styles available

• Pressurized thru bulkhead

receptacle style available

• Pre-installed coax solder contacts

are available

• Printed circuit board contacts

are available

Bayonet Coupling with Solder Contact Termination

PT, MS/PT (solder)

• MS and proprietary versions

• Factory installed solder contacts

• 3 point bayonet coupling and 5 key/keyway mating.

• Intermateable with all miniature series connectors.

• MS/PT meets MIL-DTL-26482 Series 1, service classes E, F and P.

• MS/PT is UL recognized.

SP (solder)

• SP Series is a modification of the PT with same features except a

wider flange for back panel mounting

Bayonet Coupling with Crimp Contact Termination

PT-SE, MS/PT-SE (crimp)

• MS and proprietary versions

• Crimp rear insertable/front release contact termination. (closed entry

socket insert prevents probe damage).

• 3 point bayonet coupling and 5 key/keyway mating.

• Intermateable with all miniature series connectors.

• MS/PT-SE meets MIL-DTL-26482 Series 1, service classes E, F, P.

SP-SE (crimp)

• Modification of the PT-SE with wider flange for back panel mounting

Options

• 6 shell styles with 47 insert patterns

• Coax and thermocouple contacts

are available

PT Solder

jam nut receptacle and

mated straight plug

PT-SE Crimp

wall mount receptacle

and mated straight plug

PT Solder

wall mount receptacle