Features & Specifications

COM Express Carrier Board, Type 6, ATX Form Factor

Part: Express-BASE6 | Model: Type 6 Carrier Board

Features

• COM Express Type 6 reference carrier board in standard ATX form

factor

• Supports Basic and Compact Type 6 COM Express modules that are

compliant with PICMG COM Express Revision 2.0

• Includes seven PCI Express X1 slots, one X16 slot, and one Mini PCI

Express slot

• Three Digital Display Interfaces (DDI) supporting DisplayPort, HDMI,

and DVI displays

• Integrated Realtek high definition audio codec

• Integrated Winboard Super I/O on LPC bus

• Integrated I2C to GPIO bridge for digital I/O

• Onboard diagnostic LEDs for BIOS post code data and address on LPC

bus

• Onboard socket for secondary SPI flash BIOS

• Two 220-pin COM Express Type 6 connectors

• One DB15 for analog VGA display

• One 34-pin header for LVDS

• One 8-pin header for flat-panel control

• Four SATA connectors (module dependent)

• One Gigabit (10/100/1000BaseT) Ethernet RJ45 port

• Up to Eight USB 2.0 ports (Up to four ports can be USB 3.0 if supported

by module)

• One DB9M serial port; one 10-pin header for serial interface

• Six 3.5mm connectors for microphone/audio line-in and line-out

• Two 6-pin mini-DIN connectors for keyboard and mouse

• One 20-pin header for LPC bus debug

• One 10-pin header for Smart Battery management communications

• Additional connectors for SMBus, I2C, reset, power LED, HDD LED,

buzzer and module control signals

• ATX form factor works with standard ATX power supplies and

enclosures

Specifications

BIOS

Diagnostic LEDs for BIOS POST data;

Onboard socket for secondary SPI flash

BIOS

Chipset

Winbond Super I/O on LPC bus

Dimensions

12.0” (L) x 9.6” (W)

Humidity Range

10 – 90% Relative Humidity, Non-

Condensing

Power Requirement

Standard ATX Power Supply

Storage

Temperature

-55°C to 85°C (-67°F to 185°F)

sealevel.com

+1 864.843.4343

SL9468 E22