| 数据搜索系统,热门电子元器件搜索 |
|
E39-R1 数据表(PDF) 60 Page - Omron Electronics LLC |
|
|
|||||||||||||||||||||||||||||
E39-R1 数据表(HTML) 60 Page - Omron Electronics LLC |
|
60 / 64 page ![]() E3X E3X 17 Precautions Fiber Units Tightening Force The tightening force applied to the Fiber Unit should be as follows: Screw-mounting Model Column Model Spring mounting clip Toothed washers Nuts (attachment) Retaining screw (M 3 max.) Clamping torque 3 kgf S cm max. Fiber units Clamping torque M3/M4 screw 8 kgf S cm max. (0.78 N S m) M6 screw 10 kgf S cm max. (0.98 N S m) 2-mm dia. column 3 kgf S cm max. (0.29 N S m) 3-mm dia. column 3 kgf S cm max. (0.29 N S m) E32-D14L 10 kgf S cm max. (0.98 N S m) E32-T12F 8 kgf S cm max. (0.78 N S m) E32-D12F 8 kgf S cm max. (0.78 N S m) E32-T16 5 kgf S cm max. (0.49 N S m) E32-R21 6 kgf S cm max. (0.59 N S m) E32-M21 Up to 5 mm to the tip: 5 kgf S cm max. (0.49 N S m) Up to 5 mm from the tip: 8 kgf S cm max. (0.78 N S m) E32-L25A 8 kgf S cm max. (0.78 N S m) Use a proper-sized wrench. Fiber Connection and Disconnection The E3X Amplifier has a push lock. Connect or disconnect the fibers to or from the E3X Amplifier using the following procedures: 1. Connection Insert the fibers into the E3X Amplifier and press the push lock until the Amplifier clicks to lock the fibers. The fibers will have insertion marks when they are cut with the E39-F4 (Fiber Cutter). The portion from the tips to the insertion mark should be inserted to the E3X. 2. Disconnection Be sure to press the push lock again to unlock before pulling out the fiber, otherwise the fiber may be deteriorated. Fiber Insertion If the portion from the tip to the insertion mark of the fibers are not inserted into the Amplifier Unit, the sensing distance will be re- duced. 2.2-mm dia. Fiber Thin Fiber with the E39-F4 Attachment Fiber with Fixed Length Amplifier Fiber unit 12.6 mm Insertion mark Amplifier Fiber unit Amplifier 12.6 mm 12.6 mm The portion from the tips to the insertion mark should be in- serted into the E3X. The portion from the tips to the insertion mark should be in- serted into the E3X. 60 |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |