U.I. Lapp

GmbH

DATA SHEET

ÖLFLEX® SERVO 2YSLCY-JB

DB 0036425

valid from: 21.10.2015

Originator: CHIL / PDC

approved: HAPF / PDC

Document:

DB0036425EN

page 2 of 3

All rights reserved acc. to DIN ISO 16016.

PD 0019/2.2_11.10EN

Electrical properties

Nominal voltage

U0/U

600 / 1000 V

Test voltage

Core/Core, Core/Screen

4000 V AC

Specific insulation resistance

> 20 G Ω x cm

Surface transfer impedance

at 30 MHz

≤

250 Ω / km

Mechanical and thermal properties

Min. bending radius

occasional flexing:

15 x outer diameter

fixed installation:

4 x outer diameter

Temperature range

Type “a”, 2YSLCY:

occasional flexing

-5 °C up to +70 °C max. conductor temperature

fixed installation

-40 °C up to +70 °C max. conductor temperature

Type “b”, 2YSLCYK:

gelegentlich bewegt

-15 °C bis +70 °C max. conductor temperature

fest verlegt

-40 °C bis +70 °C max. conductor temperature

Type “c”, 2YSLCY-JB BK:

occasional flexing:

-5 °C up to +70 °C max. conductor temperature

fixed installation

-40 °C up to +70 °C max. conductor temperature

Flammability

flame retardant acc. to IEC 60332-1-2 resp. VDE 0482-332-1-2

UV-resistance

Type „b“ and „c“

EN 50525-1 resp. VDE 0285-525-1,

cables with black sheath are suitable for a permanent

outdoor use,

acc. to EN 4892-2-2006, method A (change of colour allowed)

Tests

acc. to IEC 60811 resp. VDE 0473, VDE 0472, EN 50395, EN50396

EU-Directives

This cable is conform to the EU-Directives 2014/35/EU (Low Voltage Directive)

and 2011/65/EU (RoHS, Restriction of the use of certain hazardous substances).