Regulatory Compliance

■ EMI

CE Mark

EN 55032 Class A

EN 55024

EN 61000-3-2

EN 61000-3-3

■ FCC Part 15 Subpart B Class A

■ VCCI Class A

■ Safety

CB

UL/CUL

■ Environmental:

Temperature: IEC 68-2-14

Vibration: IEC 68-2-36, IEC 68-2-6

Shock: IEC 68-2-29

Drop: ISTA 2A

■ RoHS 2.0 Compliant

Warranty

Please check www.edge-core.com for the warranty terms in your

country.

For More Information

To find out more about Edgecore Networks Corporation products

and solutions, visit www.edge-core.com.

About Edgecore Networks Corporation

Edgecore Networks Corporation is in the business of providing

innovative network solutions. In the service provider network, in the

data center or in the cloud, Edgecore Networks Corporation delivers

the soſtware and systems that transform the way the world

connects. Edgecore Networks Corporation serves customers and

partners worldwide. Additional information can be found at

www.edge-core.com.

Edgecore Networks Corporation is a subsidiary of Accton

Technology Corporation, the leading network ODM company. The

Edgecore data center switches are developed and manufactured by

Accton.

To purchase Edgecore Networks solutions, please contact your

Edgecore Networks Corporation representatives at +886 3 563 8888

(HQ) or +1 (949)-336-6801 or authorized resellers.

© Copyright 2023 Edgecore Networks Corporation. The information

contained herein is subject to change without notice. This document

is for informational purposes only and does not set forth any

warranty, expressed or implied, concerning any equipment,

equipment feature, or service offered by Edgecore Networks

Corporation. Edgecore Networks Corporation shall not be liable for

technical or editorial errors or omissions contained herein.

Ports

■ Switch Ports:

16 x QSFP28 ports. Each port supports 1 x 40/100 GbE

8 line-card slots for QSFP28, DCO modules

■ Management Ports on Port Side:

1 x RJ-45 serial console

1 x RJ-45 100/1000BASE-T management

1 x USB (storage)

Key Components

■ Switch Silicon: Broadcom BCM56965 Tomahawk+

■ CPU Modules:

Intel® Xeon® D-1518 4-Core x86 Processor

DDR4: SO-DIMM 8 GB x 2

SPI Flash: 16MB

m.2 SSD: 32 GB MLC

Performance

■ Switching Capacity: 3.2 Tbps full duplex

■ Jumbo frames support up to 9216 Bytes

■ Subject to NOS:

MAC Addresses: 8 K min./136 K max.

VLAN IDs: 4 K

IPv4: 8 K min./84 K max. host entries; 16 K LPM entries with

TCAM-only mode

IPv6: 4 K min /36 K max. host entries; IPv6/64= 8 K TCAM-only

mode

Physical and Environmental

■ Dimensions (WxDxH): 44.25 x 55.0 x 6.6 cm (17.42 x 21.65 x 2.6 in.)

■ Operating Temperature: 0°C to 45°C (32°F to 113°F)

■ Storage Temperature: -40° C to 70° C (-40° F to 158° F)

■ Operating Humidity: 5% to 95% (non-condensing)

Soſtware

■ Switch is loaded with Open Network Install Environment (ONIE)

soſtware installer

■ Compatible with the following NOS options: open source

options, plus commercial NOS offerings.

LEDs

■ QSFP28 Port LEDs: Link Status, Activity, Speed

■ Ethernet Management Port LED: Link Status, Activity

■ System LEDs: Diagnostic, Locator, PSU and Fan Status

■ Modules LED: Link Status, Activity, Speed

Power

■ PSUs: 1+1 redundant, load-sharing, hot-swappable

■ Input Voltage: 100-240VAC at 50-60 Hz; -40 to -72 VDC

■ PSU Efficiency: Up to 93% for AC PSUs

Full loading, the total power consumption is approximately 1100 W.

1. Under the operation of full loading, the system of AS7716-24SC can

support 1 PSU operation if the VAC is set up at high line mode.

2. It’s necessary to use 2 PSUs when the VAC is configured at low line

mode.

t6

Weight

AS7716-24SC

DCO

QSFP28

Net Weight

11.6 kg

0.372 kg

0.322 kg