Accessories Condensation ManageMent

Spec-00542 J

EQUIPMENT PROTECTION

SUBJECT TO CHANGE WITHOUT NOTICE

ThermAl mAnAgemenT

3

h2omiT ThermoelecTric DehUmiDiFier

inDUsTrY sTAnDArDs

UL 508A Listed; File No. E61997

cUL Listed per C22.2 No. 14; File No. E61997

CE

APPlicATion

The H2OMIT Thermoelectric Dehumidifier removes moisture from

the air within an enclosure, providing an inexpensive yet highly

effective way to protect electronic and electrical components from

condensation.

FeATUres

•

Reduces corrosion that can limit the life of internal electrical and

electronic components

•

Condenses moisture from internal enclosure air and standing

liquids

•

Built-in drain provision with plastic hose directs collected

moisture to the Vent Drain (sold separately)

•

Rotating side air vents direct recirculating air away from critical

controls

•

Mounts via DIN rail on internal panel or mounts directly onto the

inside bottom of enclosure above the Vent Drain (sold separately)

•

Can be used in mild steel, aluminum, stainless steel and non-

metallic enclosures

sPeciFicATions

•

High-impact ABS shell

•

Operates on 24-Volt DC power

•

4.5 A max. (84 W)

•

Runs continuously above 32 Fa (power supply not included)

•

Removes 8 oz. of moisture in 24 hours

•

Compact 6.00-in. x 5.50-in. x 5.75-in. design

•

One Thermoelectric Dehumidifier includes:

- Four feet of plastic hose

- Two hose retainers

- One double-ended hose retainer

- Six inches of Velcro®

- Seven-inch strip of DIN rail

- Two mounting screws

Must be used with UL-certified drain to remove pooled liquid from

enclosure.

a

If continual operation is not desired, a Mechanical Hygrostat (AMHUM)

can be wired to the thermoelectric dehumidifier and then set to turn the

dehumidifier on at the desired relative humidity.

VELCRO is a trademark of Velcro Industries B.V.