PROLINE INtERNaL COmPONENts Panel and Grid MountinG SySteM

Spec-00431 H

PH 763.422.2211 • • FAX 763.422.2600 • • PentAirProtect.com

EQUIPMENT PROTECTION

mOduLaR ENCLOsuRE systEms

6

tRaNsFORmER RaILs

Transformer Rails are used to mount heavy components and

transformers in the bottom of an enclosure.

•

The rails are slotted to fit the integral mounting holes in the

frame

•

Four clip nuts and screws are furnished to mount rails to frame

•

Four M10 clamping nuts and bolts are furnished to attach

equipment to the rails

•

Rails can be installed side to side in the frame for component

mounting

•

All mounting hardware is included

Bulletin: p20

Catalog Number

Length (mm)

Length (in.)

PTR6

534

21.02

PTR8

734

28.90

PTR12

1134

44.65

gROuNdINg baR systEm

INdustRy staNdaRds

UL Component Recognized; File No. E61997

Three sizes of grounding bars and insulated mounting brackets

are available. Bars are plated copper with M6 and M5 tapped

holes to provide a common point for grounding equipment. Fits all

enclosures if mounted vertically. See table for horizontal mounting.

Bulletin: p20

Catalog Number

Description

Length

mm/in.

Number of

Holes and

Screws M6

Number of

Holes and

Screws M5

PGS2K

Fits 400-mm deep frame

front to back horizontally

200

7.87

3/5

10/10

PGS4K

Fits 600-mm deep frame

front to back horizontally

400

15.75

9/11

20/20

PGS6K

Fits 800-mm deep frame

front to back horizontally

600

23.62

15/17

30/31

PROLINE gROuNdINg KIt

The Grounding Kit allows a PROLINE

enclosure to be grounded to VDE

specifications. Includes six 12 gauge

wires 411 mm (16.19 in.) long with

ring terminations and M6 mounting

hardware.

Bulletin: p9

Catalog Number

Wire

Size

Length Between

Ring Terminals

mm/in.

Ring Terminal

Hole Diameter

mm/in.

PGK

12 ga.

411

16.19

7

.29

gRId systEm

Grid Strap installation (side to side)

Grid strap installation

(vertical and horizontal grid straps)

Full-height vertical grid strap

A Grid System provides a flexible extension to the internal mounting system already furnished with the PROLINE frame. The Grid System

allows flexible mounting capabilities in height, width and depth. Accessories or equipment can be attached directly to the Grid System

using either cage nuts or front-loading cage nuts.