MP5016 – 2.7 - 15V, 0.7 - 5A, PROGRAMMABLE, CURRENT-LIMITED SWITCH

MP5016 Rev.1.1

www.MonolithicPower.com

3

6/14/2019

MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.

© 2019 MPS. All Rights Reserved.

ABSOLUTE MAXIMUM RATINGS (1)

VCC, SOURCE ............................... -0.3V to 26V

MODE.............................................. -0.3V to 26V

GATE......................................... SOURCE+ 5.5V

All other pins ................................ -0.3V to +5.5V

Junction temperature ................-40°C to +150°C

Lead temperature...................................... 260°C

Continuous power dissipation (TA = +25°C) (2) (4)

QFN-10 (1.5mmx2mm).............................2.23W

Recommended Operating Conditions (3)

Supply voltage (VCC) ...................... 2.7V to 15V

Output voltage (SOURCE)............... 2.7V to 15V

Operating junction temp. (TJ)....-40°C to +125°C

Thermal Resistance

θJA

θJC

QFN-10 (1.5mmx2mm)

EV5016H-QH-00A (4)............. 56 ...... 18 ...°C/W

JESD51-7 (5) ......................... 130 ..... 25 ...°C/W

NOTES:

1) Exceeding these ratings may damage the device.

2) The maximum allowable power dissipation is a function of the

maximum junction temperature TJ (MAX), the junction-to-

ambient thermal resistance θJA, and the ambient temperature

TA. The maximum allowable continuous power dissipation at

any ambient temperature is calculated by PD (MAX) = (TJ

(MAX)-TA)/θJA. Exceeding the maximum allowable power

dissipation produces the excessive die temperature, causing

the regulator to go into thermal shutdown. Internal thermal

shutdown circuitry protects the device from permanent

damage.

3) The device is not guaranteed to function outside of its

operating conditions.

4) Measured on EV5016-QH-00A, 2-layer PCB, 50mmx50mm.

5) Measured on JESD51-7, 4-layer PCB.