APEM

www.apem.com

B2-129

B2

PBA series

Piezo switches

Specifications

K

Bushing diameter 16 mm, 19 mm or 22 mm

K

Sealed to IP68 and IP69K (switches mounted on panel)

K

Easy to clean metal surface

K

Very long life expectancy

K

Ring or dot illumination

ENVIRONMENTAL SPECIFICATIONS

• Sealing : IP68 per IEC 60529, IP69K per DIN 40050-9

(switches mounted on panel)

• Vibration resistance : 10-500 Hz / 10 g per IEC 60068-2-6

• Operating temperature : -40°C to +75°C

• EMC compatibility according to EN 61058-1 for the whole range

• EMC compatibility according to EN 61000-4 & EN61000-6-2 for model

1A (code 002)

ELECTRICAL SPECIFICATIONS

• Max. current/voltage rating with resistive load :

- Function A : standard 200mA 24VAC/DC - option 1A 24VAC/DC

- Function B : standard 100mA 24VAC/DC

• Switch resistance ON : 10Ω max.

• Switch resistance OFF : 5MΩ min.

• Life expectancy : 50 million cycles

• LED consumption : Illuminated dot 10mA - Illum. ring 20mA (functions A-B-C)

• Power consumption for function 1 : non-illum.10mA - illuminated 30mA

SEALING

IP68

SEALING

IP69K

MATERIALS

• Case : aluminium, anodized

or stainless steel 316L

• Multi-wire leads section 0,22 mm2

length 300 mm, twisted by pair

• Cable, length 300 mm, section

depending on switch model

• PC terminals : bronze, tin plated

GENERAL SPECIFICATIONS

• Operating force : 2 to 6N

• Torque : 2,5Nm min. - 3Nm max.

FICHIER: CPBAET-P7

le 09/01/09

ECHELLE: 0.7

indice A

CPBAET1-A

CPBAET2-A

2

3

3

1

FICHIER: CPBAET-P7

le 09/01/09

ECHELLE: 0.7

indice A

CPBAET1-A

CPBAET2-A

2

3

3

1

ΠOne-piece bushing

 Epoxy sealed terminals

Ž O-ring

Continuous immersion in water

IP68 test conditions

Continuous immersion in water

(1m, 24 hours)

IP69K test conditions

. Pressure : 80 - 120 bars

. Distance : 15 cm

. Temperature : 80°C ± 5°C

. Flow : 14 - 16 l/mn

. Duration : 30 seconds per position

High pressure, high temperature wash down

Note

: to maintain the ESD performance,

always add a ground washer when the

panel is made of non-conductive material

(PVC, polycarbonate).

For part numbers, see «Mounting

accessories» on the following pages.

The company reserves the right to change specifications without notice.

UG1410-A-R3