/

Summary

IPCE Programmer:

The programmer provides simple interface between the evaluation board and the laptop,

together with the Integrated Programming and Calibration Environment (IPCE) GUI, it allows

data capturing, measuring and auto calibration of the device. Some key features of the IPCE

are

o Simplied Sensor System Calibration and Testing

o Programs EEPROM

o Simulates Position Output

o Auto Calibration

o Stand Alone TCP/IP Addressable Software for Production

IPCE Simplies Sensor Data Capturing Function:

The IPCE software together with the programmer allow instant data capturing either by

manually click on the "capture data" button, or automatically through TCP/IP protocol. All the

data captured could be easily saved into an excel le by using the "Save Datalog" button or

transferred to the Analysis tab for further analysis. The only external requirement is an

accurate bench method to absolute mechanical movement.

IPCE simplies Calibration with a Single Click:

The IPCE software will simplify the calibration of the IC to the sensor. The software can

simulate any data collected by the measurement tab or an external environment that is

saved in our spreadsheet format. The IPCE provides a single click "Auto Calibration" function

which would automatically nd and present the optimal calibration result. These can then be

programmed to the IC for the specic sensor.

Check out our getting started design page for more tools to measure, calibrate and monitor

your sensors.

      



Documents

and

Software

 Overview

Features

Additional

Resources

Related

Tools







Products

Applications

Design Support

Order Now

About