GLADIATOR

Overview

APCD’s newest, small, lightweight, ultra flat connector designed for solider worn applications, including data sharing, battery

charging, and peripheral connectivity. Plugs and receptacles fit through MOLLE pack straps. Receptacles are designed for panel

mounting, clipped into MOLLE, or sewn into place.

• Magnetic mating orients and aligns connectors for fast, no-look mating.

• Factory adjustable engage/disengage forces to meet customer specific requirements

• Spring pins (spring probes) maintain contact through shock and vibration.

• Fluorosilicone gasket interfacial seal that seals individual contacts and the plug to receptacle.

• May be supplied cabled (flat or round) or self-terminated.

• Power and Ground Pogo pins designed for 5A continuous current

• Supports USB2.0 Data, with 90 Ω impedance

• First mate, last break, pogo contact available for ground contacts

• *Coming Soon: Multi Angle Release Gladiator with E-textile termination capability

Material

6061-T6 Aluminum

Current Rating

5A continuous

Dielectric Withstanding Voltage

120VDC

Insulation Resistance

5000MΩ at 500VDC

Operating Temperature

-50 Co to + 100 Co

Shell to Shell Resistance

< 4 mΩ

Mating Durability

5000+ Mating Cycles

De-Mate Force

3.0 to 5.0 lbs

Mechanical Vibration

MIL-STD-883 Method 2007.3 ; Test Condition A

Sealing

IP68 2m for 2hrs

Salt Spray

96 hrs

CBRN

Allows for NBC decontamination

Specifications

Pin Assignment

Pin

Specifications

Wire AWG

1

40 V @ 5amps

22 AWG

2

40 V @ 5amps

22 AWG

3

USB2.0 Data +

28 AWG

4

USB2.0 Data -

28 AWG

5

40 V @ 5amps

22 AWG

6

40 V @ 5amps

22 AWG

* Subject to change pending completion of validation test

Contact

cable_sales@amphenolpcd.com