PIC32 USB STARTER KIT III

USER’S GUIDE

 2013 Microchip Technology Inc.

DS70005132B-page 7

Preface

INTRODUCTION

This chapter contains general information that will be useful to know before using the

starter kit. Items discussed in this chapter include:

• Document Layout

• Conventions Used in this Guide

• Recommended Reading

• The Microchip Web Site

• Development Systems Customer Change Notification Service

• Customer Support

• Document Revision History

DOCUMENT LAYOUT

This document describes how to use the PIC32 USB Starter Kit III (i.e., starter kit) as a

development tool to emulate and debug firmware on a target board. This user’s guide

includes the following chapters:

• Chapter 1. “Introduction” provides a brief overview of the starter kit, highlighting

its features and uses.

• Chapter 2. “Hardware” provides the hardware descriptions of the starter kit.

• Appendix A. “Board Layout and Schematics” provides a block diagram, board

layouts, and detailed schematics of the starter kit.

• Appendix B. “Bill of Materials” provides the bill of material descriptions and the

reference, manufacturer, and part numbers for the components used in the starter

kit hardware.

NOTICE TO CUSTOMERS

All documentation becomes dated, and this manual is no exception. Microchip tools and

documentation are constantly evolving to meet customer needs, so some actual dialogs

and/or tool descriptions may differ from those in this document. Please refer to our web site

(www.microchip.com) to obtain the latest documentation available.

Documents are identified with a “DS” number. This number is located on the bottom of each

page, in front of the page number. The numbering convention for the DS number is

“DSXXXXXXXXA”, where “XXXXXXXX” is the document number and “A” is the revision level

of the document.

For the most up-to-date information on development tools, see the MPLAB® IDE online help.

Select the Help menu, and then Topics to open a list of available online help files.