Specification



Supply voltage:<=12V



Compatible Uno，Mega，Romeo......



Compatible with 12V RGB LED Strip



Maximum power is 72W （2A per way）



Support IR remote control

Pin Out

Arduino Driving Pins:



D9 -> PWM1 (Blue Output control)



D10 -> PWM2 (Red Output control)



D11 -> PWM3 (Green Output control)

IR Recieving Pin:



D4 -> IR data receiving

PS: This feature could be disable by removing the jumper cap on the shield.

Note:

1. Commonly we use the common anode RGB LED Strip. So when connecting the RGB Strip to the

driver shield, it requires a independent 12v power source for the high power LED strip.

2. The maximum powering current from this shield is about 9A totally(3A for each way). So it could

almost directly drive a 10 meter RGB LED strip.