640468 datasheet(4/66 Pages) TEC

4 / 66 page

PAGE 4

MTA, CST-100 II and SL-156 Connectors

PRODUCT FACTS

• Connectors and headers for 2 through

28 positions; wire sizes of 22, 24, 26

and 28 AWG [0.4-0.08 mm2]

• Wire-to-Post Connectors preloaded

with dual beam contacts

• Connectors and headers, except

shrouded headers, are end-to-end

stackable

• Connector styles include both closed

end and feed thru connectors with

locking ramps, with and without

polarizing tabs

• Molded ribs on housing do not allow

reverse mating

• Posted connectors for 2 through 19

positions

• Connectors preloaded with IDC contacts

• All contacts are slotted for insulation

displacement (IDC) terminal technique

• Contacts are lubricated for fretting

corrosion protection

• Benefits derived from the MTA-100

system include increased quality and

ease of handling such as:

• One-step assembly

• No wire stripping

• No contact damage

• Reduced wiring errors

• Simpler tooling

• Simple maintenance and repair

• Meets the material requirements of

Table 23.1 of UL1410 Standards for

Television Receiver and Video Products

(wire-to post connectors only)

• Recognized under the Component

Program of Underwriters Labora-

tories Inc., File No. E28476

• Certified by Canadian Standards

Association, File No. LR7189

Technical Documents Product

Specification

108-1050

MTA-100 Connectors

Application Specifications

114-1019

MTA-100 Connectors

114-1031

MTA-100 Ribbon Cable

Assembly

MTA-100 connectors accept discrete

and ribbon cable wire sizes ranging from

22–28 AWG [0.4–0.08 mm2] with maxi-

mum insulation outside diameter of .060

[1.52] for terminating single wire and .050

[1.27] for mass termination of wires. Tin

plated solid, fused stranded, or stranded

(7 strands) wire with PVC insulation can

be used on 22–28 AWG [0.4–0.9 mm2]

MTA-100 connectors and 19 stranded wire

on 22–24 AWG [0.4–0.2 mm2] MTA-100

connectors. Only one wire to be terminat-

ed into an IDC contact slot.

The wire-to-post connector housing

material is flame retardant thermoplastic,

either UL94V-2 or UL94V-0 rated.

A full line of .100 [2.54] centerline head-

ers completes the system. Headers are

available with straight or right-angle

posts, in flat, polarized or friction lock

styles. Headers are available in 2 through

28 positions. Shrouded headers are avail-

able in 2 through 14 positions.

Performance Data*

Voltage Rating—250 vac

Current Rating—5 amp max.

Low-Level Resistance—

6 mΩ max. initial

Dielectric Withstanding Voltage—

750 vac/1 min.

Insulation Resistance—

5000 MΩ min. initial

Operating Temperature—

-55° C to +105° C

Note: Refer to page 52 for approved wire listings.

*Refer to the Product Specification for additional

electrical, mechanical and environmental performance

tests and requirements.

.100 [2.54] Centerline MTA-100 IDC Connectors and Headers

640468 数据表(PDF) 4 Page - TE Connectivity Ltd

640468 数据表(HTML) 4 Page - TE Connectivity Ltd

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66

数据表下载