WRTnode Standard Shield

SKU:DFR0352

This standard sheild for WRTnode is directly stackable with the WRTnode Mini

OpenWRT Dev Board.

WRTnode （A Mini OpenWRT Dev Board）uses a MTK MT7620N 580MHZ MIPS

CPU, and is powerful in both interface and functionality. But expanding its interface with

jumper wires is troublesome since there are only pin headers and Micro USB available

onboard. This standard shielf for WRTnode not only expands GPIO, SPI, I2C, etc., but

also expands the number of USB interfaces to four, at the same time providing a 100m

Ethernet interface. Now it's your choice to have messy spaghetti or just one shield on

your board.

WRTnode （A Mini OpenWRT Dev Board） is a high performance CPU, low power

consuming, cheap and small dev board that can run OpenWRT OS and also easy to

port all open source software of Linux. OpenWRT is a Linux distribution for embedded

devices, the framework to build an application without having to build a complete

firmware around it; for users this means the ability for full customization, to use the

device in ways never envisioned.

Today, more and more devices could connect to internet, named Internet of Things.