0.96" OLED Display Module For Raspberry Pi SKU: DFR0413

 

Introduction

Sometimes your Pi projects require a display to output system information, e.g. system status,

temperature, IP address, etc. Having a full sized display attached is inconvenient if you want your

project to be portable. Use this small OLED to output your required information and keep your

product in a nice portable configuration. The display is a 0.96" 128 x 64 px OLED. The controller is a

SSD1306 and communicates via 4-wire SPI. The display also includes a built in backlight and is high

contrast with an extremely wide viewing angle.

Specification



Operating Voltage: 3.3V (1.6~3.6V)



Continuous Current: 12.25uA



Maximum Current: 100uA



Ultra low power supply



Internal DC/DC voltage converter



SPI driver support, AT64MHz[TYP] 125MHZ[OB]



FP frequency: 64fps[TYP] 368fps[OB]