Raspberry Pi e-ink Display Module

Introduction

This Raspberry Pi e-ink display module comes with a 2.13” screen with a resolution of

250×122, adopting SPI interface to communicate with Raspberry Pi. It leads out the pins

on Raspberry Pi, so there would be no conflicts if you need to use the e-ink display and

Raspberry Pi’s pins at the same time. The display supports custom font. There are two

patch touch switches on the module for expanding more applications. This e-ink display

features small size, compact layout, plug and play, and low power consumption. It can

provide clear display even in sunlight. When powered off, the e-ink display will continue

to display the last screen. Since it will take a long time for the display to refresh fully, we

don’t recommend using the product in the application that needs frequent refreshing to

display data.

NOTE: The e-ink display does not come with fonts chip, but you can download ttf

fonts to realize different display effects.