2

Absolute maximum ratings and operating conditions

Table 2. Absolute maximum ratings

Symbol

Parameter

Value

Unit

VCC

Supply voltage (1)

5.5

V

VID

Differential input voltage (2)

±5

VIN

Input voltage range

(VCC -) - 0.3 to (VCC +) + 0.3

RTHJA

Thermal resistance junction-to-ambient (3)

SOT23-5

250

°C/W

SC70-5

205

DFN8 2x2

57

RTHJC

Thermal resistance junction-to-case (3)

SOT23-5

81

SC70-5

172

DFN8 2x2

26

TSTG

Storage temperature

-65 to 150

°C

TJ

Junction temperature

150

TLEAD

Lead temperature (soldering 10 seconds)

260

ESD

Human body model (HBM) (4)

2000

V

Machine model (MM) (5)

200

Charged device model (CDM) (6)

DFN8 2x2/ SOT23-5

1500

SC70-5

1300

1. All voltage values, except the differential voltage, are referenced to VCC -.

2. The magnitude of input and output voltages must never exceed the supply rail ±0.3 V.

3. Short-circuits can cause excessive heating. These values are typical.

4. Human body model: a 100 pF capacitor is charged to the specified voltage, then discharged through a 1.5 kΩ resistor

between two pins of the device. This is done for all couples of connected pin combinations while the other pins are floating.

5. Machine model: a 200 pF capacitor is charged to the specified voltage, then discharged directly between two pins of the

device with no external series resistor (internal resistor < 5 Ω). This is done for all couples of connected pin combinations

while the other pins are floating.

6. Charged device model: all pins and package are charged together to the specified voltage and then discharged directly to

ground.

Table 3. Operating conditions

Symbol

Parameter

Value

Unit

TOper

Operating temperature range

-40 to 125

°C

VCC

Supply voltage (VCC + - VCC -), -40 °C < Tamb < 125 °C

2.2 to 5

V

VICM

Common mode input voltage range, -40 °C < Tamb < 125 °C

(VCC -) - 0.2 to (VCC +) + 0.2

TS3011

Absolute maximum ratings and operating conditions

DS8604 - Rev 9

page 3/20