Features

•

Pop and click noise protection circuitry

•

Operating range from VCC = 2.2 V to 5.5 V

•

Standby mode active low

•

Output power:

–

120 mW at 5 V, into 16 Ω with 0.1% THD+N max. (1 kHz)

–

55 mW at 3.3 V, into 16 Ω with 0.1% THD+N max. (1 kHz)

•

Low current consumption: 2.7 mA max. at 5 V

•

Ultra-low standby current consumption: 10 nA typical

•

High signal-to-noise ratio

•

High crosstalk immunity: 102 dB (F = 1 kHz)

•

PSRR: 70 dB typ. (F = 1 kHz), inputs grounded at 5 V

•

Unity-gain stable

•

Short-circuit protection circuitry

•

Available in DFN8 2x2 mm

Applications

•

Headphone amplifiers

•

Mobile phones, PDAs, computer motherboards

•

High-end TVs, portable audio players

Description

The TS488 is a dual audio power amplifier capable of driving, in single-ended mode,

either a 16 Ω or a 32 Ω stereo headset.

The TS488 eliminates pop and click noise and reduces the number of required

external passive components.

Capable of descending to low voltages, it delivers up to 31 mW per channel (into 16

Ω loads) of continuous average power with 0.1% THD+N in the audio bandwidth from

a 2.5 V power supply.

An externally-controlled standby mode reduces the supply current to 10 nA (typ.).

The unity gain stable is configured by external gain-setting resistors.

Product status link

TS488

Product summary

Order code

TS488IQT

Temperature

range

-40 to +85 °C

Package

DFN8 2x2 mm

Packing

Tape and reel

Marking

K88

Pop-free 120 mW stereo headphone amplifier

TS488

Datasheet

DS4579 - Rev 8 - May 2020

For further information contact your local STMicroelectronics sales office.

www.st.com