Symbol

Parameter

Conditions

Min.

Typ.

Max.

Unit

tPLH(3)

CL = 15 pF,

overdrive = 100 mV, VPU = VCC

ns

RPU = 2.5 kΩ, T = 25 °C

Tmin < T < Tmax

130

160

175

tPHL(4)

Propagation delay (high to low),

CL = 15 pF,

overdrive = 20 mV, VPU = VCC

RPU = 2.5 kΩ, T = 25 °C

Tmin < T < Tmax

90

115

165

CL = 15 pF,

overdrive = 100 mV, VPU = VCC

RPU = 2.5 kΩ, T = 25 °C

Tmin < T < Tmax

60

85

125

tF

Fall time (90% to 10%)

CL = 15 pF, RPU = 2.5 kΩ, overdrive = 100 mV

3.5

1. Hysteresis is a built-in feature of the TS3121. It is defined as the voltage difference between the trip points.

2. Maximum high-level output leakage current at T = 25 °C is guaranteed by design.

3. tPLH is measured when the output signal crosses a voltage level at 50% of Vcc with the following conditions: inverting inputvoltage (IN-) =

VICM and non-inverting input voltage (IN+) moving from VICM - 100 mV to VICM + overdrive.

4. tPHL is measured when the output signal crosses a voltage level at 50% of Vcc with the following conditions: inverting inputvoltage (IN-) =

VICM and non-inverting input voltage (IN+) moving from VICM + 100 mV to VICM - overdrive.

TS3121, TS3121A

Electrical characteristics

DS14484 - Rev 3

page 7/34