Please Note: This product is NOT a medical device and is not intended

to be used as such or as an accessory to such nor diagnose or treat any

conditions.

Specification



Input Voltage: 3.3 ‐ 6V (5V recommended) 



Output Voltage: 0 ‐ 3.3V 



Operating current: <10mA 



Dimension: 35 x 22(mm), 1.378" x 0.866"(in) 



Interface Type: PH2.0‐3P 

Board Overview

 

Tutorial

Requirements



Hardware  

o

DFRduino UNO (or similar) x 1 

o

Heart Rate Monitor Sensor x 1 

o

Sensor cable ‐ Electrode Pads (3 connectors) x 1 

o

Biomedical Sensor Pad x 1 

o

Jumper wires 



Software  

o

Arduino IDE V1.6.6 or above, Click to Download Arduino IDE from Arduino® 

o

                                                     https://www.arduino.cc/en/Main/Software