PC7-FESTIVAL • CompactPCI® PlusIO CPU Board • Intel® Xeon® Processor

Feature Summary

Firmware

<

Phoenix® UEFI (Unified Extensible Firmware Interface) with CSM*

<

Fully customizable by EKF

<

Secure Boot and Measured Boot supported - meeting all demands as specified by Microsoft®

<

Windows®, Linux and other (RT)OS' supported

<

Intel® AMT supported for Intel® Xeon® E3 v6 (disabled by default, must be enabled via BIOS setup)

* CSM (Compatibility Support Module) emulates a legacy BIOS environment, which allows to boot a legacy operating

system such as DOS, 32-bit Windows and some RTOS'

Main Memory

<

Integrated memory controller up to 32GB DDR4 2400 +ECC

<

DDR4 +ECC soldered memory up to 16GB

<

DDR4 +ECC SO-DIMM memory module socket up to 16GB

Mezzanine Mass Storage

<

Mezzanine side card connectors for local expansion e.g. SSD mass storage

<

Low profile mezzanine modules available (4HP common front panel)

<

Side cards available (8HP common F/P assembly)

<

P-HSE1 - configurable as 4 x SATA 6G or 4 x PCIe® Gen3 (from CM238 PCH), 1 x USB3

<

P-HSE2 - 4 x PCIe® Gen3 (from CM238 PCH) & 3

rd DisplayPort (from CPU)

<

P-EXP - Legacy interface (from PCH)

<

4HP Low profile mezzanine module preferred options:

<

C48-M2 Mezzanine module - 2 x M.2 2280 SATA SSD sockets

<

S20-NVME Mezzanine module - 1 x M.2 2280 NVME SSD socket, 1 x Type-C USB F/P connector

<

S40-NVME Mezzanine module - 1 x M.2 2280 NVME SSD socket, 1 x M.2 2280 SATA SSD socket, 2 x

Type-C USB F/P Connector (1 connector enabled for DisplayPort alternate mode)

<

8HP/12HP Mezzanine side card options:

<

SCL-RHYTHM Dual M.2 (NVMe/SATA) SSD, quad port front panel M12-X GbE

<

SCZ-NVM Dual M.2 NVMe SSD, quad UART

<

P01-M12 Replacement for RJ45 GbE jacks by M12-X receptacles

<

PCU-UPTEMPO Side board w. 2 x M.2 SATA SSD sockets & front I/O

<

Custom specific mezzanine side card design - I/O and storage

© EKF

-4-

ekf.com