SC5-FESTIVAL • CompactPCI® Serial CPU Board • Intel® Xeon® Processor

Feature Summary

On-Board Building Blocks

<

Additional on-board devices, PCIe® based

<

1 x Gigabit Ethernet controller Intel® I210IT

<

1 x Gigabit Ethernet PHY Intel® I219LM

<

IEEE 1588-2008 Precision Time Protocol including PPS and PPM signals supported

<

SATA 6G RAID controller Marvell® 88SE9230, ARM powered subsystem for host CPU offload

Security

<

Trusted Platform Module

<

TPM 2.0 for highest level of certified platform protection

<

Infineon Optiga™ SLB 9665 cryptographic processor

<

Conforming to TCG 2.0 specification

<

AES hardware acceleration support (Intel® AES-NI)

Front Panel I/O (4HP)

<

2 x Gigabit Ethernet RJ45 (1 = PCH & I219LM - Intel® AMT support, 2 = I210IT)

<

2 x DisplayPort (from processor integrated HD graphics engine, standard DP latching receptacles)

<

2 x USB 3.0

<

Option 2 x Type-C USB 3.1 Gen1 (requires low profile mezzanine expansion card w. front panel I/O)

<

Support for Type-C locking plugs (dual screw) according to the 'Locking Connector Spec. Rev. 1.0'

<

Option DisplayPort Alt Mode on lower Type-C connector (3rd video monitor output)

CompactPCI® Serial Backplane Resources

<

PICMG® CPCI-S.0 CPU card & system slot controller

<

16 x PCIe Gen3 8GT/s (2 links x 8 for two fat pipe slots, derived directly from the Xeon® or Core™ CPU)

<

6 x PCIe Gen3 8GT/s (6 links x 1 for peripheral slots, derived from CM238 PCH)

<

2 x SATA 6G (from CM238 PCH)

<

4 x SATA 6G (Marvell hardware RAID controller)

<

5 x USB2, 3 x USB3 (from CM238 PCH)

<

Option 8 x Gigabit Ethernet Marvell 88E6390 switch, requires S80-P6 low profile mezzanine expansion card

<

Option 4 x Gigabit Ethernet Intel® I210-IT NIC, requires S82-P6 low profile mezzanine expansion card

© EKF

-5-

ekf.com