6.5

PowerSSO-16 marking information

Figure 54. PowerSSO-16 marking information

Special function digit

&: Engineering sample

<blank>: Commercial sample

PowerSSO-16 TOP VIEW

(not to scale)

GADG0310161234SMD

Parts marked as ‘&’ are not yet qualified and therefore not approved for use in production. ST is not responsible

for any consequences resulting from such use. In no event will ST be liable for the customer using any of these

engineering samples in production. ST’s Quality department must be contacted prior to any decision to use these

engineering samples to run a qualification activity.

6.6

SO-8 marking information

Figure 55. SO-8 marking information

1

2

3

4

5

6

7

8

Marking area

Special function digit

&: Engineering sample

<blank>: Commercial sample

GAPG2705151558CFT

SO-8 TOP VIEW

(not in scale)

Note:

Engineering Samples: these samples can be clearly identified by a dedicated special symbol in the marking of

each unit. These samples are intended to be used for electrical compatibility evaluation only; usage for any other

purpose may be agreed only upon written authorization by ST. ST is not liable for any customer usage in

production and/or in reliability qualification trials.

Commercial Samples: fully qualified parts from ST standard production with no usage restrictions

VN7040AJ, VN7040AS

PowerSSO-16 marking information

DS10829 - Rev 5

page 38/45