ABRACON IS

ISO9001-2015

CERTIFIED

Flat Wire / Hot Pressed Molded Power Inductor

AMELH4030S

4.2 x 4.2 x 3.0 mm

RoHS/RoHS II Compliant

MSL Level = 1

Request Samples

Check Inventory

REVISION A : 6/16/2025

12117 Bee Caves Rd, Bldg-3, Suite 200

Bee Cave, TX 78738

Phone: 512-371-6159 Fax: 512-351-8858

For terms and conditions of sales, please visit:

www.abracon.com

Test Conditions

Test frequency: 1.0V/100KHz

Test Temp: 25˚C Ambient

Isat: DC current at which the inductance drops 30% from its value without current.

Irms: DC current that causes the temperature rise (ΔT, approximate 40 ˚C) from 25°C ambient.

Operating Voltage: 40V

Operating Temperature: -40˚C ~ +125˚C. (including self-temperature rise)

Rated DC Current: The lower value of Irms and Isat

Part Temperature (Ambient + Temp. Rise): Should not exceed 125°C under worst case operating conditions

Storage Condition: -40˚C ~ +125˚C (on board), -10˚C ~ +40˚C (with packaging) and R.H. 60 max

AMELH4030S Series is RoHS Compliant and Pb free.

AMELH4030S -

Inductance Code

See Electrical Specification table

Packaging

T: Tape and Reel (See Packaging)

Tolerance

M = ± 20%

Part Identification

T

R13

M