Features

•

STEVAL-IOM001V1

–

IO-Link master PHY based on L6360

–

Interrupt diagnostics pin

–

I²C and UART interface

–

SPI (slave) interface

–

65 mA selectable (3.3 or 5.0 V) linear regulator

–

CQ (push-pull) and L+ (high side) switches

–

IQ additional IEC61131-2 type 1 digital input

–

L+ and CQ overload and overheating protections with non-dissipative cut-

off function

–

QFN-26L (3.5x5x1 mm) package

–

Operating voltage range from 18 to 32.5 V

–

Additional high side switch for L+ heavy loads (IPS161H)

–

LEDs for status and diagnostics

–

Ground and VCC wire break protections

–

EMC compliance with IEC61000-4-2, IEC61000-4-3, IEC61000-4-5

–

Equipped with ST morpho connectors

–

CE certified

–

RoHS and China RoHS compliant

•

NUCLEO-F446RE

–

STM32F446RET6 32-bit Micro-controller based on ARM®Cortex®-M4 core

(180 MHz max.) with 512-Kbyte Flash memory and 128 (+4) Kbyte RAM

–

Two types of extension resources: Arduino™ UNO Revision 3 connectivity

and ST morpho extension pin headers for full access to all STM32 I/Os

–

Mbed-enabled (http://mbed.org)

–

On-board ST-LINK/V2-1 debugger/programmer with SWD connector:

selection-mode switch to use the kit as a standalone ST-LINK/V2-1

–

Two push-buttons: USER and RESET

Description

The P-NUCLEO-IOM01M1 is an STM32 Nucleo pack composed of the STEVAL-

IOM001V1 and the NUCLEO-F446RE boards. The STEVAL-IOM001V1 is a single

IO-Link master PHY layer (L6360) while the NUCLEO- F446RE runs an IO-Link stack

rev 1.1 (developed by and property of TEConcept GmbH, license limited to 10k

minutes, renewable without additional costs).

The STM32 Nucleo pack provides an affordable and easy-to-use solution for the

evaluation of IO-Link applications, L6360 communication features and robustness,

together with the STM32F446RET6 computation performance. The pack, hosting up

to four STEVAL-IOM001V1 to build a quad port IO-Link master, can access the IO-

Link physical layer and communicate with IO-Link Devices.

You can evaluate the tool via the dedicated GUI (IO-Link Control Tool©, property of

TEConcept GmbH) or use it as an IO-Link master bridge accessible from the

dedicated SPI interface: source code of demo project (Low-Level IO-Link Master

Access Demo Application, developed by TEConcept GmbH) and API specification are

available for free.

Product summary

STM32 Nucleo

pack for IO-Link

master with IO-

Link v1.1 PHY

and stack

P-NUCLEO-IOM01M1

IO-Link master

evaluation board

based on L6360

equipped with ST

morpho

connectors for

STM32 Nucleo

STEVAL-IOM001V1

IO-Link

communication

master

transceiver IC

L6360

STM32

Nucleo-64

development

board with

STM32F446RE

MCU

NUCLEO-F446RE

STM32 Nucleo pack for IO-Link master with IO-Link v1.1 PHY and stack

P-NUCLEO-IOM01M1

Data brief

DB3629 - Rev 2 - July 2018

For further information contact your local STMicroelectronics sales office.

www.st.com