SN74LVC2G17

SCES381N – JANUARY 2002 – REVISED JANUARY 2015

www.ti.com

7 Specifications

7.1 Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted)

(1)

MIN

MAX

UNIT

VCC

Supply voltage range

–0.5

6.5

V

VI

Input voltage range(2)

–0.5

6.5

V

VO

Voltage range applied to any output in the high-impedance or power-off state (2)

–0.5

6.5

V

VO

Voltage range applied to any output in the high or low state (2)(3)

–0.5

VCC + 0.5

V

IIK

Input clamp current

VI < 0

–50

mA

IOK

Output clamp current

VO < 0

–50

mA

IO

Continuous output current

±50

mA

Continuous current through VCC or GND

±100

mA

TJ

Junction temperature under bias

150

°C

Tstg

Storage temperature range

–65

150

°C

(1)

Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings

only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating

Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2)

The input negative-voltage and output voltage ratings may be exceeded if the input and output current ratings are observed.

(3)

The value of VCC is provided in the Recommended Operating Conditions table.

7.2 ESD Ratings

VALUE

UNIT

Human-Body Model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins(2)

2000

V

VESD

(1)

Charged-Device Model (CDM), per JEDEC specification JESD22-C101, all

1000

V

pins(3)

(1)

Electrostatic discharge (ESD) to measure device sensitivity and immunity to damage caused by assembly line electrostatic discharges in

to the device.

(2)

JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.

(3)

JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.

7.3 Recommended Operating Conditions

over operating free-air temperature range (unless otherwise noted)

(1)

MIN

MAX

UNIT

VCC

Supply voltage

Operating

1.65

5.5

V

VI

Input voltage

0

5.5

V

VO

Output voltage

0

VCC

V

VCC = 1.65 V

–4

VCC = 2.3 V

–8

IOH

High-level output current

–16

mA

VCC = 3 V

–24

VCC = 4.5 V

–32

VCC = 1.65 V

4

VCC = 2.3 V

8

IOL

Low-level output current

16

mA

VCC = 3 V

24

VCC = 4.5 V

32

TA

Operating free-air temperature

–40

125

°C

(1)

All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report,

Implications of Slow or Floating CMOS Inputs, literature number SCBA004.

4

Submit Documentation Feedback

Copyright © 2002–2015, Texas Instruments Incorporated

Product Folder Links: SN74LVC2G17