DS000032 Rev 1.5

July ‘99

©1999 REG No 277 4001, ENGLAND.

Page 1

FEATURES

DESCRIPTION

The FM-RCHn-XXXRS is a complete remote control system supplied ready to operate. Installation requires

connections to be made only to the power supply which can be 240Vac or 12Vdc.

Available in options of 1 - 4 channels. It provides 5A rated relays at 240Vac with either momentary or latching

operation. The system incorporates a highly secure ‘code hopping’ transmission protocol to prevent grabbing

and scanning of the data.

The outputs may be programmed to operate in latching or momentary mode. (there is a maximum of two

latching or three momentary outputs). A timed output feature is also available on output four.

The system has a range of up to 200 metres in direct line of sight, and requires minimal installation. The

decoder has an easy learn feature which enables it to learn the ‘signature code’ of individual

transmitter/encoders switches.(These are memorised even if the power is removed).

The decoder may also be used in conjunction with the FM-ECAC auto transmitting encoder. (RS Stock code

226-3398)

The system is supplied ready to operate with the remote transmitter/encoder. The decoder is supplied in an

IP64 rated enclosure.

BLOCK DIAGRAM

R

R

D

R

T

R

E

R

R

Y

O

S

N

S

Y

2

c

o

C

R

1