3

TP05 NEEDLE TEMPERATURE PROBE

This probe uses the bulbous handle to enable the sensor tip to be pushed into a semi-solid

product with maximum ease of use.

Construction

Needle Probe 3.3mm Diameter by 115mm Long. Stainless Steel 316 (Food Grade)

2M curly polyurethane cable with moulded connector. Complete waterproof assembly.



WIDE AMBIENT TEMPERATURE SPECIFICATION

: -30 TO 50 °C



TIME RESPONSE

(96%of value in water)

: 1.6 Secs



MEASUREMENT RANGE

: -100 TO 280 °C

TS07 SPRUNG SHIELD SURFACE PROBE

This probe uses the straight handle for fine control. The probe is designed for the

measurement of surface temperatures with wide temperature range.

Construction

Surface probe with sprung tip with thermocouple sensor attached with draught shield:

Stainless Steel 316 (Food Grade). 2M curly polyurethane cable with moulded connector.

Waterproof Handle.



WIDE AMBIENT TEMPERATURE SPECIFICATION

: -30 TO 50 °C



TIME RESPONSE

(96% of value on clean metal)

: 3.0 Secs



MEASUREMENT RANGE

: -50 TO 400 °C

Accessories

TEMPRB

Temperature log book for temperature record keeping. Eight page log book suitable for all

temperature recording, and especially HACCP critical temperature record-keeping.

FKC02 Case

FKC02 Standard Carry Case with Inserts for a Handheld Thermometer, Straight and Bulbous

handheld Probes and Accessories. An ideal way to keep your temperature measuring equipment

in one place and protected.

Case Measurements: 34cm x 26cm x 6.5cm (approximate external)

Holds Up To

• 1 x Handheld Thermometer

• 3 x Straight Handheld Probes

• 1 x Bulbous Handled Probe

• 1 x Spare Battery