

TIME RESPONSE

(96%of value in water)

: 2.0 Secs



MEASUREMENT RANGE

: -200 TO 400 °C

TA01 FINE WIRE (PTFE) THERMOCOUPLE SENSOR

This sensor is constructed using a 1M length PTFE wire constructed as a twisted pair. The wire

used is ½ Class 1 Type T alloys (Cu / Co). A weld bead is manufactured at one end of the wire

whilst the other end is terminated in a moulded miniature thermocouple plug.



WIDE AMBIENT TEMPERATURE SPECIFICATION

: -50 TO 50 °C



TIME RESPONSE

(96% of value in moving gas)

: 0.1 Secs



MEASUREMENT RANGE

: -100 TO 250 °C

Accessories

TAPS – THERMOCOUPLE ATTACHMENT PADS

TAPS are designed for use in attaching small diameter thermocouples, such as the TME Fine Wire

Probes, to surfaces or pipes in hard to reach areas. Each kit contains a book of 20 Pads.

The pads are manufactured from 0.120mm standard grade PTFE impregnated fibreglass with

0.050mm of high temperature silicone pressure sensitive adhesive. This product is almost

chemically inert. Only molten alkali metals and fluorine under elevated temperatures and

pressure will attack the PTFE surface. The fibreglass provides dimensional stability and restricts

PTFE cold flow. The PTFE provides a non-stick / quick release surface in heat-sealing machines,

plastic bag manufacturing and roll-can covering.

Adhesion

(oz/in width)

45

Break strength

(lbs/in width)

120

Elongation

(%)

<5

Backing thickness

(mm)

0.120

Adhesive thickness

(mm)

0.050

Temperature range

(C)

-75 to +260

TAP Measurements approx.

17mm x 12mm (each)

Operating Temperature Range

-75 to +260°C

TEMPRB

Temperature log book for temperature record keeping. Eight page log book suitable for all

temperature recording, and especially HACCP critical temperature record-keeping.

LEGC01 Case

The case measures: 34cm x 26cm x 6.5cm (approximate external)

Holds up to:

•

1 x Handheld Thermometer

•

2 x Straight Handled Temperature Probes

•

Fine Wire Probes

•

1 x spare battery