TLV702xx

GND

EN

IN

OUT

V

IN

V

OUT

On

Off

C

IN

C

OUT

1

F

Ceramic

m

Product

Folder

Order

Now

Technical

Documents

Tools &

Software

Support &

Community

An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,

intellectual property matters and other important disclaimers. PRODUCTION DATA.

TLV702

SLVSAG6D – SEPTEMBER 2010 – REVISED JULY 2019

TLV702 300-mA, Low-IQ, Low-Dropout Regulator

1

1 Features

1

•

Very Low Dropout:

–

37 mV at IOUT = 50 mA, VOUT = 2.8 V

–

75 mV at IOUT = 100 mA, VOUT = 2.8 V

–

220mV at IOUT = 300 mA, VOUT = 2.8 V

•

2% Accuracy

•

Low IQ: 35 μA

•

Fixed-Output Voltage Combinations Possible from

1.2 V to 4.8 V

•

High PSRR: 68 dB at 1 kHz

•

Stable With Effective Capacitance of 0.1 μF

(1)

•

Thermal Shutdown and Overcurrent Protection

•

Packages: 5-Pin SOT-23 and 1.5-mm × 1.5-mm,

6-Pin WSON

(1)

See the Input and Output Capacitor Requirements in

Application Information.

2 Applications

•

Wireless Handsets

•

Smart Phones

•

ZigBee® Networks

•

Bluetooth® Devices

•

Li-Ion Battery-Operated Handheld Products

•

WLAN and Other PC Add-on Cards

3 Description

The TLV702 series of low-dropout (LDO) linear

regulators are low quiescent current devices with

excellent line and load transient performance. These

LDOs are designed for power-sensitive applications.

A precision bandgap and error amplifier provides

overall 2% accuracy. Low output noise, very high

power-supply rejection ratio (PSRR), and low-dropout

voltage make this series of devices ideal for a wide

selection of battery-operated handheld equipment. All

device versions have thermal shutdown and current

limit for safety.

Furthermore, these devices are stable with an

effective output capacitance of only 0.1 μF. This

feature enables the use of cost-effective capacitors

that have higher bias voltages and temperature

derating. The devices regulate to specified accuracy

with no output load.

The TLV702P series also provides an active pulldown

circuit to quickly discharge the outputs.

The TLV702 series of LDO linear regulators are

available in SOT23-5 and 1.5-mm × 1.5-mm WSON-6

packages.

Device Information(1)

PART NUMBER

PACKAGE

BODY SIZE (NOM)

TLV702

SOT-23 (5)

2.90 mm × 1.60 mm

WSON (6)

1.50 mm × 1.50 mm

(1) For all available packages, see the orderable addendum at

the end of the data sheet.

Typical Application Circuit