6 Specifications

6.1 Absolute Maximum Ratings- TLV3011 and TLV3012

Over operating free-air temperature range (unless otherwise noted)(1).

MIN

MAX

UNIT

Supply voltage

7

V

Signal input pins

Voltage(2)

–0.5

(V+) +0.5

V

Current(2)

±10

mA

Output short circuit(3)

Continuous

Operating temperature

–40

125

°C

TJ

Junction temperature

150

°C

Tstg

Storage temperature

–65

150

°C

(1)

Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress

ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under

Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device

reliability.

(2)

All voltage values are with respect to the network ground pin.

(3)

Short circuit to ground

6.2 Absolute Maximum Ratings - TLV3011B and TLV3012B

over operating free-air temperature range (unless otherwise noted)(1)

MIN

MAX

UNIT

Supply voltage: VS = (V+) – (V–)

–0.5

7

V

Input pins (IN+, IN–) from (V–)(2)

–0.5

7

V

Output (OUT) (Open-Drain) from (V–)(3)

–0.5

7

V

Output (OUT) (Push-Pull) from (V–)

–0.5

(V+) + 0.5

V

Output short circuit current(4)

10

mA

Junction temperature, TJ

150

°C

Storage temperature, Tstg

–65

150

°C

(1)

Operation outside the Absolute Maximum Ratings may cause permanent device damage. Absolute Maximum Ratings do not imply

functional operation of the device at these or any other conditions beyond those listed under Recommended Operating Conditions.

If used outside the Recommended Operating Conditions but within the Absolute Maximum Ratings, the device may not be fully

functional, and this may affect device reliability, functionality, performance, and shorten the device lifetime.

(2)

Input pins are diode-clamped to (V–). Inputs (IN+, IN–) can be greater than (V+) as long as within the –0.5 V to 7 V range. Inputs

beyond –0.3 V must be current-limited to less than –10 mA, while inputs beyond 7 V must be externally voltage clamped.

(3)

Output (OUT) for open drain can be greater than (V+) and inputs (IN+, IN–) as long as it is within the –0.5 V to 7 V range

(4)

Short-circuit to (V–) or (V+).

6.3 ESD Ratings

VALUE

UNIT

V(ESD)

Electrostatic

discharge

Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001(1)

±2000

V

Charged-device model (CDM), per ANSI/ESDA/JEDEC JS-002(2)

±1000

(1)

JEDEC document JEP155 states that 500 V HBM allows safe manufacturing with a standard ESD control process.

(2)

JEDEC document JEP157 states that 250 V CDM allows safe manufacturing with a standard ESD control process.

TLV3011, TLV3012, TLV3011B, TLV3012B

SBOS300C – FEBRUARY 2004 – REVISED APRIL 2023

www.ti.com

4

Submit Document Feedback

Copyright © 2023 Texas Instruments Incorporated

Product Folder Links: TLV3011 TLV3012 TLV3011B TLV3012B