Technical Datasheet

Chloroprene (CR) internal Type 503/6

Technical Data

Raw material

: Chloroprene (CR)

Colour

: black (BK)

Working temperature

: -25 °C to +100 °C

Typical Data

Hardness

: ca 40 +/- 5 Shore A

Stability

: 8 N/mm²

Ultimate elongation

: 400%

After storage in dry heat 100°C, 70h

- Hardness

: app. +5 Shore

- Stability

: app. +/- 0 %

- Ultimate elongation

: app. -10 %

After store in ASTM-Oil No.2 at 100°C, 7d

- Hardness

: app. +5 %

- Tensile strength

: app. -15%

- Ultimate elongation

: app. -20 %

- Volume

: app. -8 %

: passed

Type

KV/mm

HT 1,25 x 0,5

14,00

HT 1,75 x 0,5

19,20

HT 2,5 x 0,9

13,30

HT 3,0 x 0,6

12,00

HT 4,0 x 1,5

19,60

HT 5,0 x 0,7

8,70

HT 7,5 x 0,8

5,30

HT 10,0 x 1,0

5,00

HT 12,0 x 1,0

6,00

HT 14,0 x 1,0

7,00

HT 17,0 x 1,0

4,00

HellermannTyton GmbH

Grosser Moorweg 45

Telefon: +49 (0) 4122/701-1

D-25436 Tornesch

Telefax: +49 (0) 4122/701-400

This information is based on our experience and does not imply suitability without prior testing. Due to the variables of manufacture and enviromantel conditions it is

strongly recommended that samples are tested in-situ

PM.V01/01.08.07

The differences of the dielectric strenght are due to the different used materials. All materials are within

the specifications stated aboved.

600-50500 / 608-00500

600-55500 / 608-00550

600-60500 / 608-00600

Part.-No

Dielectric strength of sleeves and tubing

600-10200 / 608-00100

600-15200 / 608-00150

600-20250 / 608-00200

600-25250 / 608-00250

600-30300 / 608-00300

600-35250 / 608-00350

600-40300 / 608-00400

600-45350 / 608-00450

Grommets (HT) and tubes (HS) made of this Chloroprene are free of silicone!

Flammability at FMVSS

The above mentioned results were ascertained on reference blocks which fulfil the valid norms for this tests.

Differences can occur within the tolerance.

Different row materials are partly used for these measurements which are certainly within the above

mentioned specifications.