BradyID.com/i5100 • 1-888-272-3946

3

1 Top-loading design

Reduces footprint in your workspace and simplifies

media alignment and loading

2 Ribbon takeup spindle

Both spindles are keyed for guaranteed correct ink-side

orientation and slip quickly into place with no complicated

ribbon thread-through, no axles to loosen or tighten and

no separate cardboard core needed

3 Print head

300 or 600 dpi print heads are interchangeable through

the Brady service department so you can change your

print resolution if your needs change

4 Media guide adjustment (center-aligned media)

A simple turn of the dial auto-centers the media guides

from 5.1 mm to 114 mm widths

5 Sensors

Both the gap and notch sensors are easy to adjust,

and with IP-enabled media rolls, sensors are

auto-detected and the correct settings are

displayed for the user

6 Color touchscreen control panel

Icons and sliders for easy printer setting adjustments and

information about parts when using Brady IP-enabled rolls

7 Roll holder with label part detection

Printer auto-detects IP-enabled label rolls to communicate

part set up information to both printer and Brady software. Holds

3 in. core roll

8 Ribbon cog with ribbon part detection

Printer auto-detects IP-enabled ribbon part and communicates ribbon

information to the user and warns if the incorrect ribbon is used

9 Interface options

2x USB, USB 2.0, RS-232C, Ethernet and SD card (back of printer)

Print roller

Green synthetic rubber rollers available in 4 widths and can be replaced

by the user if worn, or to pair a narrow roller with narrow media

Integrated auto-cutter (optional model)

Built-in cutter for complete cut through of approved media

11

10

1

7

8

9

3

4

5

2

11

6

10